(630) 543-7373

Stake Bodies & Flat Beds

Built Tough, with a Solid Foundation

Dependability and Quality

Performance You Can Rely on

When you need a unique cargo solution, our stake bodies and flat bed trucks will fit the bill. We offer a variety of sizes and options. 

Toughline Series

The Toughline platform is the foundation for most body options. Be assured our bodies rest on a solid foundation. Read through the specification list for this one and know your truck body is well supported.

Specifications

Structureline Series

The Structureline platform is built for rough service.  Load it down and work it hard. The structural steel channel throughout will handle your toughest job.

Specifications

Rancher Special Series

The Rancher Special is handsome but strong.  It’s got guts.  Example: The 9’4″  body has 7 structural cross members plus a structural front rail covered and reinforced with floor plate. There is more.  See the Specifications.

Specifications

Bale Spike Series

We took the very popular Rancher Special and added an electric hydraulic bale spike.   This model will fast become your favorite piece of equipment.   Simple, rugged design for trouble free service. 

Specifications

Available Stake Bodies & Flatbeds Specifications

Toughline Platform Specifications

Available Widths 87 1/4″ 96″
Lengths 8′, 9′ 6″, 12′ 8′, 9′ 6″, 10′, 12′, 14′, 16′, 18′, 20′, 22′, 24′

Floor Types

Standard Optional
2×6 T&G, COP8, #1 Structural Seclect SYP Apitong Wood
10 gauge Smooth Steel 3/16” Smooth Steel
12 gauge Treadplate Steel 3/16” Treadplate Steel
Steel Overlay

Side & End Rails

  • 6 ¾” face 11 gauge

Stake Pockets

  • Accommodates 2” x 4” nominal lumber or our standard stakes.

Cross Sills

  • 4 7/8” face 11 gauge; 16” on center standard, 12” optional
  • Optional: 4" 5.4# structural on 16" or 12"

Longsills

  • 8’ – 12’, 6" 8.2# structural channel
  • 14’ – 16’, 7” 9.8# structural channel
  • 14’ – 16’, 7” 9.8# structural channel

C/M Gussets

  • 9 ¼” x 5 ½” – 10 gauge, at every cross sill

Lighting

  • Required lighting and marking per FMVSS108, installed

Wiring Harness

  • Weather Resistent, SAE #J-1128

Paint

  • Primed and painted with Industrial EnamelStandard finish on platforms is black with decals. Other options or modifications available on request.

Structureline Specifications

Lengths: 12 ft through 24 ft    |    Widths: 96”, 102” optional

Floor Types

Standard Optional
2×6 T&G, COP8, #1 Structural Seclect SYP Apitong Wood
10 gauge Smooth Steel 3/16” Smooth Steel
12 gauge Treadplate Steel 3/16” Treadplate Steel
Steel Overlay

Side & End Rails

  • 6” – 8.2# Structural Channel

Outside Pockets

  • 1 13/16” x 3 9/16” – ¼” formed steel pocket spacers
  • (1/4” x ½”) Will accommodate 2 x 4 or our standard stake

Outside Tie Rail

  • 3/8” x 2” flat bar

Cross Sills

  • 4” – 5.4# Structural Channel; 12” on center

Longsills

  • 12’
  • 14’ – 16’
  • 18’ – 24’
  • 6” – 8.2# structural channel
  • 7” – 9.8# structural channel
  • 8” – 11.5# structural channel

Gussets

  • 9 ¼” x 5 ½” - 10 ga.at every cross sill

Lighting

  • Required lighting and marking per FMVSS108, installed

Wiring Harness

  • Weather resistant, SAE #J-1128

Paint

  • Primed & painted with Industrial EnamelStandard finish on platforms is black with decals. Other options or modifications available on request.

Rancher Special Series

Standard Sizes

  • 8’3”
  • 9’4”
  • 10’
  • 11’4”
  • 12’

Standard Widths

  • 84” (SRW)
  • 92” (DRW)
  • 96” (DRW)
  • 99.5” (DRW)

Bulkhead

  • 8’3” = 35”
  • 9’4” – 12’ = 39”
  • 50” Optional
  • 3” x 2” x 11gauge tubing frame with 14 gauge solid bottom panel and louvered window.

Frame

  • 1 13/16” x 3 9/16” – ¼” formed steel pocket spacers(16” average centers)
  • 6” 8.2# structural channel longsills
  • 8’3” bodies = 38” spacing
  • 9’4” – 12’ = 34” spacing

Rear Apron

  • 3/16” formed steel, 10 5/8” deep

Receiver Hitch

  • 4” x 3” x 1/4” tubing frame with 2” SAE receiver hitch and safety chain loops

Gooseneck Hitch

  • 6” 8.2# structural channel
  • 4” 5.4# structural channel
  • ½” plate and 3/16” plate welded into both the longsills and crossmembers(Trailer ball not included)

Floor

  • 1/8” treadplate with 6 1/2” vertical face on side rail

Stake Pockets

  • 3/16” formed steel sized to accommodate 2” x 4” lumber

Tie Rail

  • 3/8” x 2” both sides with two segmented sections for fuel filler installation

Paint

  • Degreased, iron phosphate etched, primed and painted with industrial enamel
  • Gloss Black is standard

Lights

  • LED clearance and tail lights, includes 2 each stop, turn, tail and 1 each back up per side
  • Light kit shipped loose
  • Lighting and marking per FMVSS 108
  • Optional light package available for the bulkhead
  • Optional 8” Utility Racks available

Stake Rack Specifications

Lengths: 7 ft through 24 ft    |    Widths: 78” – 87 ¼” – 96”

Standard Heights

  • 7’, 8’, 9’6”, 12’ = 30”
  • 8 ft. thru 24 ft. – 40”
  • Other heights on request

Interior Dimensions

  • 6” less than length and width(16” average centers)

Slats

  • 6” x 16 gauge rollformed steel or 1 x 6 pine

Stakes

  • 14 gauge rollformed with 12 ga. Liners

Finish

  • Powder Coat Gloss Black

Front

  • 12 gauge Bulkhead w/full width window standard
  • Stake front optional

Rears

  • Hinged, swing out

Hardware

  • Western style heavy duty spring loaded gate locks with plated hinge rods on swing gate and rears

Hold down latch

  • Spring-loaded in stake; 1 per section

Side Sections

  • 7’ – 10’ 2-piece sides
  • 12’ – 20’ 3-piece sides/1 swing gate per side
  • 22’ – 24’ 4-piece sides/1 swing gate per side

Connect with us today!

Looking to purchase or repair a stake body or flatbed truck? Let our team of experts help you.